[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.13 How to set up a 6-Bone connection

 
zebra configuration 
=================== 
!  
! Actually there is no need to configure zebra 
!

bgpd configuration
==================
!
! This means that routes go through zebra and into the kernel.
!
router zebra
!
! BGP-4+ configuration
!
router bgp 7675
 bgp router-id 10.0.0.1
!
ipv6 bgp network 3ffe:506::/32
ipv6 bgp neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 remote-as as-number
ipv6 bgp neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 route-map set-nexthop out
ipv6 bgp neighbor 3ffe:1cfa:0:2:2c0:4fff:fe68:a231 remote-as as-number
ipv6 bgp neighbor 3ffe:1cfa:0:2:2c0:4fff:fe68:a231 route-map set-nexthop out
!
ipv6 access-list all permit any
!
! Set output nexthop address.
!
route-map set-nexthop permit 10
 match ipv6 address all
 set ipv6 nexthop global 3ffe:1cfa:0:2:2c0:4fff:fe68:a225
 set ipv6 nexthop local fe80::2c0:4fff:fe68:a225
!
! logfile FILENAME is obsolete.  Please use log file FILENAME
!
log file bgpd.log
!



This document was generated by Jasper Wallace on April, 24 2001 using texi2html