[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.2 SMUX configuration

To enable SNMP support of Zebra, you have to configure Zebra with --enable-snmp (see section 2.1 Configure the Software).

Command: smux peer oid {}
Command: no smux peer oid {}

Command: smux peer oid password {}
Command: no smux peer oid password {}

 
!
smux peer .1.3.6.1.6.3.1 test
!



This document was generated by Jasper Wallace on April, 24 2001 using texi2html