[Ronja] SMD ronja RX

[Karel Kulhavy]

Hi Mark,

---- Mark Robinson <mark.robinson at paradise.net.nz> schrieb:
> Cecilia Puon wrote:
>   Also the R122 is 2.2Mohms?
> 
> Thank you for your fast answer.
> 
> Cecilia Puón

> Now that's scary, the schematic diagram I pulled down from

>     http://ronja.twibright.com/schematics/rx_experimental_00.pdf

This is some experimental unfinished schematic. A user doesn't have
to bother with this oen at all.

Karel

> shows many resistors with the same designation (Rnnn). There's a > trap.

> If the resistor you are looking at has it's value specified as 2M2 > then yes, 
> 2.2 meg-ohms.

> El mar, 29-09-2009 a las 14:57 +1300, Mark Robinson escribió:
>> Cecilia Puon wrote:
>> >   Hello, I hope some of you can help me . I am buying the components for 
>> > arming the SMD Ronja Receiver but I am confused with 1 of the parts:
>>
>> R103
>>
>> 2M2 = 2.2MOhm
>>      = 2.2 mega-ohms
>>      = 2200000 ohms
>>
>> > I do not know exactly which is the value of the resistor.
>>
>> C110
>>
>> 270 = 270pF
>>      = 270 picofarad
>>      = 0.27 nanofarad
>>      = 0.00027 microfarad
>>      = 0.000000000270 Farad
>>
>> > Also I dont know the value of this capacitor.
>> > 
>> > If you can guide me with the value of this components I would appreciate 
>> > it very much.
>> > 
>> > Thank you for your support.



_______________________________________________
Ronja mailing list
Ronja at lists.pointless.net
http://pointless.net/mailman/listinfo/ronja