[Ronja] Home made twister PCB

[Karel Kulhavy]

---- Bruce M Simpson <bms at incunabulum.net> schrieb:
> Deepak Mishra wrote:
> >
> >
> > I am making Twister 1,    so I dont have any SMD components, all my 
> > components are DIL
> > DILs will be easy to solder by hand on toner transfered boards isn't it ?
> 
> Provided you get good precision on the drilling, all through components 
> -- sure, can do -- but that's a lot of holes! I found that using 
> laminate board was best, with an Archimedean hand drill (the kind you 
> push up and down). Unless you have access to a decent drill press, but 
> even then, accuracy is key.
> 
> Do yourself a favor, get boards made... is my suggestion.

ronjashop.com now has twister2's, someone asked me on the IRC.

CL<